The differential leakage current module is a 2-channel RCM. The charging station from the TWIN package supports 2 charging points. The power point consists of AC cables with a car charging connector, open cable ends, protective covers and brackets (parking position). The charging controller unit is AC Advanced.
The TWIN charging technology kit with AC charging cables contains sample assembly and installation instructions for electric vehicle charging stations (EVSE), including other recommendations, necessary components (including charging contactor, safety device), for charging two electric vehicles with connectors type 2.
Installation and commissioning may only be carried out by electricians, who must observe the applicable national regulations!
- AC charging current type (3 phases)
- Charging power 22 kW
- Charging current 32 A
- Charging voltage 400 V AC
- Cable length 5 m
- 1-channel RCM differential leakage current module
The individual components of the HOME Charging Kit can be found here.
Security and certificates
The starter pack complies with the European specifications IEC 62196-2 and IEC 61851-1 for charging electric vehicles with a Type 2 connector. If required by law, the individual components are CE marked. The charging point is equipped with a protective cover with certified protection at the IP54 level.
The HOME Charging Kit comes with a standard 24 month warranty.